Simple and Easy to Use
Compact In-line Model

CM series
CM series

In-line Concentration Monitor

CM series

ys

ATAGO's Efforts

CM-800α series
9 Reasons to Choose Our Inline Refractometer

Wide range with excellent accuracy

Wide range with excellent accuracy

0.00 to 80.0% Brix can be measured with a high accuracy of ± 0.1%. Supports various applications with numerous special scales and Intrinsically Safe Explosion-Proof models. Select the most suitable installation method for your application and location! Choose from installtion types such as: pipeline, directly into the tank (ferrule), or hose connector bypass!

Measureable at low and high temperatures.

Measureable at low and high temperatures.

ATAGO's CM-800α series is equipped with automatic temperature compensation (ATC) and supports a wide range of temperatures from 5℃ to 100℃. Since the wetted surface can handle up to 160℃, use CIP and SIP cleaning with confidence! Since the wetted surface can handle up to 160℃, use CIP and SIP cleaning with confidence!

Flat Sample Stage

Flat Sample Stage

By making the sample stage (wetted part) completely flat, the adhesion of the sample liquid to the prism surface is minimized and is more hygienic. The prism stage is re-polished in 1/100 mm increments during manufacturing to eliminate the chance of slight uneveness that may occur between the prism surface and the prism stage.

Enhanced Cleaning with a Prism Wiper or Ultrasonic Cleaner

Enhanced Cleaning with a Prism Wiper or Ultrasonic Cleaner

Due to their nature, some sample liquids will adhere or build up on the prism no matter what after longterm use. For these cases, ATAGO has designed both prism wiper and ultrasonic cleaning devices. Using either of these means is no need to stop the line or remove the in-line refractometer many times just to clean the prism when buildup occurs.

Numerous Special Scales Available

Numerous Special Scales Available

Special scales are available for many different samples, such as ethylene glycol, propylene glycol, urea, NMP, hydrogen peroxide solution, DMF, saline solution, sodium hydroxide, ethyl alcohol (V / V), ethyl alcohol (W / W), IPA, wheat juice, wine, and more!

Compact All-In-One Unit

Compact All-In-One Unit

CM-800α is a model with the operation/display on the front and the detection sensor located on the back. The compact size makes it ideal for installation in various processes and applications.

Compatiblity with strong acids and strong alkalis (Hastelloy / Titanium)

Compatiblity with strong acids and strong alkalis (Hastelloy / Titanium)

For use with harsh chemicals, the wetted part of the CM-800α series can be customized. It is possible to change the standard stainless steel material to Hastelloy or titanium for added durability. Because all the metal is shaved and polished in-house, we can flexibly respond to changes in materials.

Safe To Use with Food Related Equipment

Safe To Use with Food Related Equipment

ATAGO's inline refractometer meets the safety and health standard institutions EHEDG and 3-A Sanitary Standards requirement for instrumentation's wetted parts surface finish to be Ra 0.8 or less, clearing EC No 1935/2004 as well as FDA (21 CFR)-GRAS(Generally Recognized as Safe). These specifications clear the component requirements for stainless steel so the inline refractometer can be used with confidence.

Reliable and high quanity, used in over 80 countries worldwide

Reliable and high quanity, used in over 80 countries worldwide

Customers must stop production if there is an issue with the system or inline refractometer, which can cause a big impact. For that reason, reliability and a good track record are important points. The CM-800α series is a long-selling product that has been highly acclaimed around the world for 20 years. ATAGO provides excellent support and aftercare service from offices and service center around the world should you encounter any issue.

CM-800α series
Case Study

POINT

Block nonconformities by process

Raw material manufacturing process

Check the concentration of the extract

Manage extraction yield by measuring the Brix of the extracted solution.Depending on the extraction rate, re-extraction may be performed.

Blending process

Mixing Ratio Feedback System

The mixing ratio can be detected in real time, and feedback is given so that there are no non-standard products.

Filling process

Pre-Bottling Final Check

A final check on the product before bottling is made to make sure it is within specifcations.It can also be used to reduce liquid loss by controlling the switching to water during cleaning.

CM-800α series
Applications

CM-800α series
Lineup

CM-800α series

CM-TANKα series

Explosion-proof specifications

CM-INTANK series

Option

Custom orders available. Contact ATAGO for further details.

For details, please contact ATAGO.

SUS(standard specification)

SUS(standard specification)

Stainless steel with high strength and excellent corrosion resistance.Sanitary specification.

Titanium

Titanium

Metal with high strength, light weight, corrosion resistance, heat resistance. In particular, it has higher corrosion resistance to salt than the stainless steel.

Hastelloy

Hastelloy

Alloy with high corrosion resistance and heat resistance. Alloy with high corrosion resistance and heat resistance. * Hastelloy is a trademark of Haines Corporation, USA.

PRM series and CM series fittings that meet VARIVENT standards are also available.

For details, please contact ATAGO.

What is VARIVENT®?

VARIVENT® is a standard for pipeline installation. Mainly used in Europe, but also in countries around the world. The wetted parts of In-line Refractometers may be customized to work with VARIVENT® components. PRM series and CM series fittings that meet VARIVENT standards are also available.
* VARIVENT® is a registered trademark of GEA Tuchenhagen.

CM-800α series
Fitting

Purchase